Arduino 16 road PWM/Servo/Steering gear drive plate Controll

时间:2019-01-24 浏览:次

1. Overview

LC PCA9685 module could control 16 road by PWM, every road programmable output for shut, open. Through the I2C communication.

2. The function and characteristics
● Working voltage: 2.3-5.5V
● Communication protocol: I2C
● Cannel number: 16
● Resolution ratio: 12 bit
● V+ Input: According to peripheral voltage, Maximum 6V

3. Introduced the hardware and instructions
● The board size: 63.1*31.8mm
● The board function description:
VCC: The working voltage of the module
GND: Ground
SCL、SDA: I2C communication interface
V+: Steering gear and other peripheral driving voltage
PWM: PWM signal output

VCC connect to the Arduino 5V, GND connect to the Arduino GND, SDA connect to A4, SCL connect to A5, steering gear with 0-15 arbitrary channel connection, burn write code , steering gear began to turn it.

上一篇：16 channel steering control board STM32 Servo controller rob

下一篇：PWM turn voltage module 0%-100%PWM turn to 0v-10V voltage

Contact us

PWM module

Arduino 16 road PWM/Servo/Steering gear drive plate Controll