PAM8302A 2.5W Mono Class D power Amplifier Module
Overview
LC PAM8302A Mono power amplifier module equipped with 2.5W high efficiency, low noise, mono D differential input power amplifier chip, With small size, good sound quality characteristics. suitable for impedance 4-8Ω, speaker power within 10W .
Function features
1.On-board with PAM8302A audio amplifier chip, gain 24dB
2.Operating voltage: 2.5V-5V
3.Output power: 5V power supply when the maximum output power 2.5W
4.With thermal protection and short circuit protection
5.Quiescent current 4mA, but while shutdown mode, the current is only 1uA
6.Board size: 24.5*15.5mm
Board function description
● VCC, GND: operating voltage input
● SD: enable side (can be suspended when normal work, then go to GND when the shutdown mode)
● IN +, IN-: audio signal input
● VO +, VO-: audio signal output
LC PAM8302A Mono power amplifier module equipped with 2.5W high efficiency, low noise, mono D differential input power amplifier chip, With small size, good sound quality characteristics. suitable for impedance 4-8Ω, speaker power within 10W .
Function features
1.On-board with PAM8302A audio amplifier chip, gain 24dB
2.Operating voltage: 2.5V-5V
3.Output power: 5V power supply when the maximum output power 2.5W
4.With thermal protection and short circuit protection
5.Quiescent current 4mA, but while shutdown mode, the current is only 1uA
6.Board size: 24.5*15.5mm
Board function description
● VCC, GND: operating voltage input
● SD: enable side (can be suspended when normal work, then go to GND when the shutdown mode)
● IN +, IN-: audio signal input
● VO +, VO-: audio signal output