ESP 8266 Watch programming development board
SKU: LC-ESP8266-Watch
Overview
LC ESP8266 watch of development board,using ESP-12F module,8266 chip can development your want functions. Onboard 3.7V lithium battery and charging circuit. The appearance is a watch type with a strap,which can be worn on the hand, plus an oled display is more intuitive and beautiful.
Function
Onboard a 1.3-inch OLED core is SH1106, One RGB light and three-way pulsator switch,Powered by 3.7v polymer lithium battery, The USB port can be used as a programming port or a charging port:small size match strap wearing Very convenient, you can control your device anywhere.
Hardware introduction and description
1.Board size: 45 * 38mm
Height after installation: 18mm
Weight: 30g
2.Board physical map description
Please open flash_download_tools_v3.6.7 of the programming software and select ESP8266
Then select the project file esp8266_deauther.bin to burn to the ESP8266 watch. The burning configuration is shown as below:
Note
When programming the ESP8266 watch development board, the upper and lower boards need to be connected to the cable and the switch can be turned on for normal programming!