Arduino 16-way PWM/Servo/Steering Gear Drive Plate Controll

Overview

LC PCA9685 module could control 16 road by PWM,every road programmable output for shut and open. Through the I2C communication.

Function features
1.Working voltage: 2.3-5.5V
2.Communication protocol: I2C
3.Cannel number: 16
4.Resolution ratio: 12 bit
5.V+ Input: According to peripheral voltage, Maximum 6V

Hardware introduction and description
1.Board size: 63.1*31.8mm
2.Board function description:
VCC: the working voltage of the module
GND: ground
SCL,SDA: I2C communication interface
V+: steering gear and other peripheral driving voltage
PWM: PWM signal output

VCC connect to the Arduino 5V, GND connect to the Arduino GND, SDA connect to A4, SCL connect to A5, steering gear with 0-15 arbitrary channel connection, burn write code , steering gear began to turn it.