1.Using low power version of the CY7C68013A56 chip,enhanced 51 core,16KB program data areas,clocked at 48MHZ,480Mbps high speed transmission protocol standards, in line with the USB2.0 specification, backward compatible with USB1.1.
2.Firmware EEPROM: complete in system programming program,directly using the USB cable to download the firmware,provide 16K (24LC128) large capacity program memory (EEPROM),used to store the VID / PID and USB firmware to meet CY7C68013A program space demand.
3.On board standard 40pin PATA (IDE) outlet,using the CYPRESS GPIF interface,corresponding with firmware can be achieved (IDE hard disk) and removable hard disk function.
4.On board standard USB Blaster download cable outlet,with the appropriate firmware to achieve the USB Blaster download feature,is fully compatible with ALTERA USB Blaster use,function and performance are in line with ALTERA original download cable.
5.On board four programmable LEDs and two buttons,convenient to display the operational status of the user program and trigger the program conditions.
6.All the GPIO pin are leaded out through 2.54mm standard to greatly facilitate the learners' own expansion design.