PRODUCT

Contact us

Name:Helen.

Tel:+86-755-82720811

E-mail:helen@chinalctech.com

Add:Room 301,Building No.3,Guole Technopark,Lirong Road,Dalang Street,Longhua District,Shenzhen 518110,China.

Online consulting

AD/DA Module

Position:Home > Product > Module Series > AD/DA Module >

MCP4725 DAC Module I2C Interface DA Conversion

Overview
MCP4725 is low power consumption and high precision of the single channel 12 buffer voltage output digital to analog converter, have EEPROM, Users can use the I2C interface command write the DAC input and configuration data into EEPROM, to achieve the digital analog conversion function.

Function features
1.12-bit resolution
2.I2C interface
3.Module working voltage: 3.3V~5.5V
4.Provide test program of the Arduino to generate sine wave.

Hardware introduction and description
1.Board size: 15.5*15.5mm
2.Board function description
VCC GND: POWER Input
SDA SCL: I2C interface
OUT GND: Signal output
P1 in three welding plate is used to change the I2c address (the default address is 0x60):down to 0x60,when up to 0x61.

Simple test method
Burning the test program into Arduino UNO board, VCC GND SDA SCL connect to 5V GND A4 A5, OUT GND connect to the oscilloscope, so you can see the following waveform: