ESP8266 test-board burner One-click Download support ESP-01S ESP12S ESP07S module
LC ESP8266 burner suitable for firmware burning test of modules such as anxinke ESP-12S/12F/12E/07S/07/01S/01 ,all IO ports have been extracted and can be as a minimum system development board or a small batch burning fixture .
1.Suitable for firmware burning test of modules such as ESP-12S/12F/12E/07S/07/01S/01。
2.Support firmware one-click download
3.Safe and reliable, small size, long service life.
4.There are power indicator light, burning indicator light, serial communication indicator light.
5.Lead out all IO ports,can be as a minimum system development board or a small batch burning fixture
Hardware introduction and description
Board weight :21g
Board of function
Interface of description
User guide :
1. According to the operating system to download the corresponding CH340 serial port chip driver and install it.
2.Download official Flash download tool ESPFlashDownloadTool.
3.Automatic firmware download:Press into the module, plug in USB line supply power，cooperate with Flash download tool, configure the corresponding burning parameters,click start download, can start firmware burning, The downloader will automatically reset and put the module into burning mode.
4.Download firmware by manual:Press into the module, plug in USB line supply power，open burner software, configure the corresponding burning parameters,press burner button long time . then press reset button short time ,click start download, can start firmware burning.