Smart Home WIFI Mobile Remote Control 2-Way Relay Module

Overview
LC eWeLink WIFI 2-Way switch is a device that smart control the functions of  home appliances through mobile phones and voice. 2-Way controller, adjust inching, self-latching, and interlocking three mode on eWeLink APP. Suitable for curtains, roller shutters, electric sliding doors, etc. Built-in memory chip, ultra high stability,even stop the network,still working on time in time. Support voice control, mobile control ,remote control ,use smart and convenient.

Function
1. Smart cloud control,support control multiple devices with one mobile,share the handing delight with your family, support a mobile phone can control multiple module and multiple module can be control by one phone ,can share to achieve multiple control use. Company, office, and merchandise are also subject to the main account management mechanism, which means that the employee leave also can withdraw his control permission by one button.
2. Support voice control module
Support tianmao jingling, Google Home, Alex voice control,no need for gateway host, direct voice control, Compatible with a variety of smart sounds and devices on the market.
3. Use wechat Applets or APP smart control
Using ewelink app log in ewelink app account carry on device control,wechat seach ewelink ,found the Applets to operate.
4. Smart timing delay function
Set auto open time or close time,Accurate to 1 minute,single timing ,period timing,Multiple modes, multiple sets of timing, can be added or customized..
5. Super remote control,lights, exhaust fans, electrical appliances, mobile phone remote control is no longer a problem from this distance control the device with app in anywhere and anytime, only you mobile have 2/3/4G signal  all be control.
6. Can instead 99% of traditional switches
Instead accessing the traditional switch,use mobile phone ,AI device smart control switch status.

Introduction
1. Board size: 120*38.8mm     Weight: 62g
Wiring diagram:

Specification
1. Input voltage :AC 90V-250V
2. Maximum current:10A
3. Output:inching, self-latching , interlocking control signal
4. External material : fireproof  retardant material

Software connection method
1. Search the“eWeLink”App on the market to download and install.
2. Long press manual button, the green indicator flashing on module about 7s later.
3. Open ewelink app,click “+”icon and  add  it  ,click  next step ,input mobile phone  wifi account and password(The connected WiFi frequency should be 2.4G),click next,mobile and device close to router wait a moment,then named for the module ,like bedroom light.
4. If you have internet you can control it after added . module switch status,mobile phone will feedback at the same time.